GatorHyde
  • Safety

Case History: Utility Trailer

CASE HISTORY:

  • A contracting company located in the Oklahoma City area was looking for a coating system, which would provide a good wearing surface that was also non-skid.

  • The contractor had several new trailers to coat as well as many older ones.

  • The contractor had a limited amount of time in which each trailer could be out of operation.

  • GatorHyde CG was chosen because if its rapid cure time and excellent non-skid qualitites.

  • A local contractor coated several trailers such as the one in this picture. The equipment used for this project, was a Graco E-10 High Pressure Pump.

  • This project took place in July of 2001.

MATERIAL:

  • Primer specified - ChemLoc 213 Manufactured by Lord Chemical Co.

  • Coating specified - GatorHyde CG, Color - Black

INSTALLATION:

  • All the utility trailer beds were first sand-blasted to remove all rust, oil and debris.

  • Once the sand-blasting had been completed and the wooded rails removed, the edges of the trailer were masked off using wire trim tape for easy removal.

Utility Trailer With GatorHyde CG:

Contractor rolling down ChemLoc 213 metal primer. Photo after primer has been installed.
Application of GatorHyde CG using a Graco E-10 Pump. Utility trailer after installation of GatorHyde CG, color black.

GatorHyde, a product of ESI Advanced Polymers       Copyright 2002-2008 Elastomer Specialties, Inc.       www.elastomer.com
website design by Evolution Studios